Видео

Thank you.

Anything that works without getting killed or dismembered okay with me . 😂👍🏻

I have one of these, the first thing you need to do is replace the chain with a good quality chain, the factory chain is crap

1:14 "well I'm gonna start cranking this and see what happens". I remember my teenage years.

I changed it and the brake booster but the brake lights don’t work. Is there any thoughts on this?

Does this come apart easily? I'm using it for shade to organize things for a big yard sale.

First of all people, always clamp your work piece, secondly, keep your fingers away from the blade, crazy.

I have a 79 and an 81 DOHC CB750. To adjust the cam chains, you need not go to the lengths of removing the valve cover, and alternator cover - Both Chains have tensioners that are automatically adjust once loosening the adjustment bolt. For example, for the top cam chain that connects the to cams together - loosen the locknut and the 10mm. Run the engine for about 30 seconds - the chain tensioner will adjust automatedly. Now turn your engine off. Tighten the 10mm "Gently", and then the lock nut. The other tensoner is on the intake side of the engine. No Lock nut - just loosen. Start Engine. Run for 30 seconds. Stop engine. Tighten gently - You are done !

I replaced my motor and resistor and the darn thing still won't blow. Any idea? Fuze?

Worked great with some Liquid Wrench and working the mechanism back and forth with the screwdriver! Thank you for taking the time to post!

It’s easy to understand that this wheel lock clamp is a deterrent for thieves. This combination with a steering wheel lock and alarm system will make the thieves think twice about stealing your car. Is obvious that nothing is full proof but the time consuming to take this shit off is a fact.

Good video. I just wanted to see how to do the intake gasket which should always be changed on these cars if its unknown. I might as well do knock sensor too since its easy to access once intake is off. Good video.

Best review of any product just short of "Project Farm" I believe I've ever seen. Camera work, narration and everything just Primo. I have a background in broadcast television so I would call this an authoritative opinion. I have been thinking about buying one of these for a while and I'm still kind of on the fence. Thanks for your video, very helpful.

It's not the impact wrench but the heft of the socket. Your old impact wrench would probably have worked.

Ill be getting one for sure

Snow plow

Very helpful

you just take the whole take you don't need to transfer. They will drain it for you and give you back your oil tank. Oriley does it all the time

How have you made out with your three wishes? Were you able to install some kind of a grass flap Chute blocker and be able to put on a grass catcher while keeping your mulch system intact? If so please share!!

What if it doesn’t start when you do that

Ok very smart , I fought myself getting this blade to the point that I had it at the register and scanned, and I returned it... What . So I have wanted a D2 blade for the longest time but out of my budget point for so long, so when I saw this at their SEMA showing I have been going to HF and asking do you have it yet. My point this weekend there is a Icon deal buy however many icon hand tools get a percentage off, and. For I TC members spend 40 you get a free tool. Well I made that super purchase included was the icon knife. With the lifetime warranty 🎉

I also bought one and I’m extremely happy with it so far …My best from Albuquerque..

If you think the 900 dewalt impact wrench is good then you will love the 961 it's the flagship of dewalt and is a lot more powerful than the 900.

Adding the roll cage will stiffen the cab and frame if done correctly so your doors wouldn’t matter after that

why does it not connect to my phone when i plug it in?

Thanks. We replaced ours today. God bless you.

Thanks

I would ask for a 50 percent deposit up front then the remaining 50 percent upon completion. That way you can have the customers have in the game

I started my truck every day for a week by doing this. 😆

Honestly what a legend! Me and my partner had this issue with our car. My fiance is good with cars but he couldn't fix it as he had tried this morning, after watching your video I saw him how you did it and after 3 minutes we fixed ours !!! THANK YOU!!!!

They do make a Bosch hammer drill that has more balls it's $250 to $300. The hammer hits harder. I'm a mason I have both.

Get a knife in the dollar store and carrier that...

I just replaced my front driver side on my 05 crv. Those 3 bearings were lose on the transmission side. My crv was thudding.when I stepped on the gas. Just rolling no shudder vibrations.

Pretty old post not sure if this will get eyes on it but how would this do to get up imbedded rock in landscape garden? Thx

Is this self propelled or just pushed …if that makes sense. My Dad want to get a good self propelled one…he’s 87yr old. Yes I do weed whacking for him but I think he just likes to be doing something!!

Excellent video man I have never owned a Ford before I always had a Chevy and your video helped me out a whole bunch. Thank you

Wasted video

Great video man!

I stopped watching once music started playing

Oh dam I like those last ones

How has it held up over time?

I have one and I agree completely. Great knife for the money. I highly recommend this knife. Cheers!

I just found that model, the online ad says, selling for about $71....scam ad maybe??? I have paid the same as you for the Troy brand one...but once it gets used, mine would NOT restart till totally cooled....took $ 64 to have a shop fix here, even though i paid $75 extend w. Shop said it ad to clean the carb(?) Before i used it 2x! But now im using it for a elderly lady with a bedrock showing.

I have a set of the SK but I haven’t looked to see if they were still US made with the weirdness that company has had going on. I try to stick to US or Taiwan made, or generally just not made in China. Sometimes I’m buying for specific features (think Mac RBRT) and my only reasoning has to be “because I want them” lol

Just have a bon fire and burn wood. It’s cheaper.

Perfect, thank you.

Not a good video. You need to mention which way the open slot of switch v/s the closed hole of the opposite side ...and also the orientation of boister rod ..some have an offset

Thanks f0r this, I'm having a similar problem. Did you get a check engine light for this?

Yep I’m about to order this Dewalt impact wrench to loose up the crank bolt on my son 2005 civic so I can change the water pump and timing belt it a pain in the ass ✌🏽

30 ACRES lol. 1,306,800 Sq. foot